• Address

    C-188, Sector 31-D, P&T Society,

    Korangi Industrial Area,

    Karachi-74900,

    Pakistan

     

  • Call us on

     +92-21-35070751

     +92-300-5776703

  • Mail us @

    info@pakplc.com

     

PCI-1602A

2-port RS-422/485 PCI Communication Card w/Isolation
pci-1602a


Main Features

  • PCI bus specification 2.1 compliant
  • Speeds up to 921.6 kbps
  • 2-port RS-422/485 interface
  • I/O address automatically assigned by PCI Plug & Play
  • OS support: Windows® 98/ME/2000/XP
  • isolation protection for RS-422/485
  • Interrupt status register for increased performance
  • Space reserved for termination resistors
  • Automatic RS-485 data flow control
  • Powerful and easy-to use utility (ICOM Tools)
 
Introduction

PCI-1601 and PCI-1602 are 2 port RS-422/485 PCI communication cards that are compatible with the PCI 2.1 bus specification. Both cards provide two optional isolated and EFTsurge protected RS-422/485 ports, and comes with features such as: high transmission speed of 921.6 kbps, optional EFT Surge & isolation protection, windows utility softwareand more. The cards also come with high-performance 16PCI952 UART with a 128-byte FIFO to reduce CPU load. This makes the PCI-1601 and PCI-1602 especially suitable formultitasking environments. 
PCI-1602 is available with 3,000 VDC optical isolation to protect your PC and equipment against damages from ground loops in harsh environments. To further increase reliability,both boards has EFT surge protection technology, protecting your system from abrupt high voltages up to 2,500 VDC (PCI-1601B and PCI-1602B). Besides, Advantech also providesa convenient utility program called ICOM Tools, to help test the PCI card performance by analyzing the port status. Controlled by easy-to-use menu commands and toolbar buttons,ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitors the signal status. In addition, ICOM Tools is applicableto all series of Advantech ICOM cards.
Specifications
Part Number PCI-1602A-AE
Communication
<br>Interfaces		 CAN -
Current Loop -
RS-232 -
RS-422 V
RS-485 V
Display Ports 2
Network Cable 
Connector 
Type		 N/A
Protection Isolation 3000 VDC
Surge -

 

 

PCI-1602B

2-port RS-422/485 PCI Communication Card w/Isolation and EFT
pci-1602b


Main Features

  • PCI bus specification 2.1 compliant
  • Speeds up to 921.6 kbps
  • 2-port RS-422/485 interface
  • I/O address automatically assigned by PCI Plug & Play
  • OS support: Windows® 98/ME/2000/XP
  • surge protection
  • isolation protection for RS-422/485
  • Interrupt status register for increased performance
  • Space reserved for termination resistors
  • Automatic RS-485 data flow control
  • Powerful and easy-to use utility (ICOM Tools)
 
Introduction

PCI-1601 and PCI-1602 are 2 port RS-422/485 PCI communication cards that are compatible with the PCI 2.1 bus specification. Both cards provide two optional isolated and EFTsurge protected RS-422/485 ports, and comes with features such as: high transmission speed of 921.6 kbps, optional EFT Surge & isolation protection, windows utility softwareand more. The cards also come with high-performance 16PCI952 UART with a 128-byte FIFO to reduce CPU load. This makes the PCI-1601 and PCI-1602 especially suitable formultitasking environments. 
PCI-1602 is available with 3,000 VDC optical isolation to protect your PC and equipment against damages from ground loops in harsh environments. To further increase reliability,both boards has EFT surge protection technology, protecting your system from abrupt high voltages up to 2,500 VDC (PCI-1601B and PCI-1602B). Besides, Advantech also providesa convenient utility program called ICOM Tools, to help test the PCI card performance by analyzing the port status. Controlled by easy-to-use menu commands and toolbar buttons,ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitors the signal status. In addition, ICOM Tools is applicableto all series of Advantech ICOM cards. 
Specifications
Part Number PCI-1602B-AE
Communication
<br>Interfaces		 CAN -
Current Loop -
RS-232 -
RS-422 V
RS-485 V
Display Ports 2
Network Cable 
Connector 
Type		 N/A
Protection Isolation 3000 VDC
Surge 2500 VDC

 

 

PCI-1610A

4-port RS-232 PCI Communication Card (4 DB25)
pci-1610a


Main Features

  • PCI bus specification 2.1 compliant
  • Speeds up to 921.6 Kbps
  • 4-port RS-232
  • 16PCI954 UARTs with 128-byte FIFOs standard
  • I/O address automatically assigned by PCI Plug & Play
  • OS supported: Windows® 98/ME/2000/XP, Linux®
  • Interrupt status register for increased performance
  • Powerful and easy to use Utility (ICOM Tools)
 
Introduction

PCI-1610 is a 4-port RS-232 PCI communication card that is compatible with the PCI 2.1 bus specification. (PCI-1610CU is also compliant with 2.2) and offer transmission speeds up to 921.6 kbps. PCI-1610 also comes with high-performance 16PCI954 UART with a 128-byte FIFO to reduce CPU load. These components make your system more stable and reliable. Thus, the PCI-1610 is especially suitable for multitasking environments. 
PCI-1610CU has a universal PCI connector that is compatible with both the latest 3.3 V signaling systems and the traditional 5V signaling system. This gives high compatibility and allows usage in diverse systems. To further increase reliability, the PCI-1610B and PCI-1610CU offers EFT surge protection technology, protecting your system from abrupt high voltages up to 2,500 VDC. PCI-1610CU also provides 2,500 VDC isolation to protect your PC and equipment against damages from ground loops in harsh environments. 
Advantech also provides a convenient utility program, ICOM Tools, to help test the PCI card performance by analyzing the port status. With menu commands and toolbar buttons, ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communications data and monitor the signal status. ICOM Tools is applicable to all series of Advantech ICOM cards.
Specifications
Part Number PCI-1610A/9-AE PCI-1610A-AE
Communication
<br>Interfaces		 CAN - -
Current Loop - -
RS-232 V V
RS-422 - -
RS-485 - -
Display Ports 4 4
Network Cable 
Connector 
Type		 DB9 Male DB25 Male
Protection Isolation   -
Surge

-

 -

 

 

PCI-1603

2-port RS-232 Current-loop PCI Communication Card with Isolation Protection
pci-1603


Main Features

  • Two independent RS-232 or Current-loop serial ports
  • Each port can be individually configured to RS-232 or current-loop
  • 16PCI952 FIFO UART (128-byte FIFO)
  • PCI bus specification 2.2 compliant
  • Current-loop: 57.6 kbps RS-232: 50 bps ~ 230.4 kbps Speeds:
  • I/O address automatically assigned by PCI Plug & Play
  • OS supported: Windows® 98/ME/2000/XP/XP Embedded, Linux
  • Interrupt status register for increased performance
  • Powerful and easy-to use utility (ICOM Tools)
  • Universal PCI (Supports 3.3 V or 5 V PCI bus signal)
 
Introduction

PCI-1603 offers a versatile range of high-speed interfacing options. You can switch its ports between the popular RS-232 or noise-resistant current-loop. The card utilizes 16PCI952 UARTs with 128-byte FIFO buffer for faster and more reliable communication, especially under multi-tasking environments such as Windows operating systems. 
The card utilizes 16PCI952 UART that buffers data into packets before sending it to the bus. This drastically reduces CPU load and avoids data loss when the system is busy and cannot process an interrupt quickly. These FIFO buffers make the PCI-1603 especially suitable for high speed serial I/O under Windows.
Specifications
Part Number PCI-1603-BE
Communication
<br>Interfaces		 CAN -
Current Loop V
RS-232 V
RS-422 -
RS-485

-
Display Ports 2
Network Cable 
Connector 
Type		 -
Protection Isolation 3000 VDC
Surge -

 

 

Technical data for failsafe CPUs

SIMATIC S7-300

CPU CPU 315F-2 DP 1) CPU 315F-2 PN/DP CPU 317F-2 DP 1) CPU 317F-2 PN/DP

CPU 319F-3 PN/DP
Dimension (mm) 40 x 125 x 130 80 x 125 x 130 80 x 125 130 120 x 125 x 130
Order No. group: 6ES7 312-6FF. 315-2FH. 317-6FF. 317-2FK. 318-3FL
Memory
RAM 192 KB 256 KB 1 MB

1.4 MB
Instructions 36 K (F instr.) 50 K (F instr.) 20 K (F instructions) 280 K (F onstr.
Processing times
Bit operation 0,1µs 0,05µs 0,01 µs
Word operation 0,2µs 0,2µs 0,02µs
Fixed-point operation 2 µs 0.2 µs 0.02 µs
Floating-point operation 3 µs 1 µs 0.04 µs
Bit memories/timers/counters
Bit memory 2048 bytes 4096 bytes 8182 bytes
S7 timers/counters 256/256 512/512 2048/2048
IEC timers/counters ■ ■ ■
Address areas
I/O (bytes) 2048/2048 8192/8192 8192/8192 8192/8192
I/O Process image 128/128 bytes 256/256 bytes 2048/2048 bytes 2048/2048 bytes
Digital channels (central) 1024 1024 1024 1024
Analog channels (central) 256 256 256 256
DP interface
DP maser systems internally/CP ■/■ ■/■ ■/■
DP slave ■ ■ ■
PROFINET interface
PROFINET CBA   ■   ■ ■
PROFINET IO   ■   ■ ■
TCP/IP   ■   ■ ■
UDP   ■   ■ ■
ISO-on-TCP (RFC 1006)   ■   ■ ■
Web server   ■   ■ ■

Siemens S7-300 PLC

SIMATIC S7-300

A graded CPU range with a wide performance range is available for configuring the controller. Thanks to their high processing speed, the CPUs enable short machine cycle times. The narrow module width results in a compact controller design or a small control cabinet.

The CPUs are available from a width of only 40 mm. Fail-safe CPUs are available for safety-oriented applications. The PROFIsafe profile for safe communication via PROFIBUS and PROFINET allows the integration of safety-related functions into standard automation environments.

Compact CPUs with width of 80 or 120 mm also offer integral I/O and integral technological functions. This onboard I/O (digital/analog) and the technological functions save additional investments in other modules.

Applications include the following:

  • High-speed counting/measuring with direct access to the hardware counter
  • Simple positioning with direct control of the MICROMASTER frequency inverter
  • PID control with integral function block

This range is rounded off by a special technology CPU with powerful technological function, especially for motion control.

Together with the integral digital I/O and equidistant and isochronous mode on PROFIBUS DP, off-the-shelf, PLCopen-compliant motion control of several (even linked) axes.

Micro Memory Card

 

The Micro Memory card is a compact medium that meets the highest industrial requirements, especially ESD protection and mechanical ruggedness.

The system-tested Micro Memory Card Allows more write cycles than conventional memory cards and offers know-how protection because the serial number can be read out.

Version CPU

Isochronous mode on the PROFIBUS

 Integrated interfaces Integral I/O Integrated technological functions
Standard CPUs
  CPU 312, 314 1)   MPI    
CPU 315-2 DP 1)   MPI, DP
CPU 315-2 PN/DP 1)

■

 DP/MPI, PORFINET
CPU 317-2 DP

■

 DP/MPI, DP
CPU 317-2 PN/DP 1)

■

 DP/MPI, PROFINET
  NEW CPU 319-3 PN/DP

■

 DP/MPI, DP, PROFINET
Failsafe CPUs
  CPU 315F-2 DP 1)   MPI, DP   Fail satety with PROFIsafe profile
CPU 315F-2 PN/DP

■

 DP/MPI, PROFINET
CPU 317F-2 DP 1)

■

 DP/MPI, DP
CPU 317F-2 PN/DP

■

 DP/MPI, PROFINET
CPU 319F-3 PN/DP

■

 DP/MPI, DP, PROFINET
Compact CPUs
  CPU 312C 1)   MPI Digital ■ Counting
■ Rules
■ Frequency measurement
■ Pulse width modulation
■ Pulse generator
CPU 313C 1)   MPI Digital, Analog
CPU 313C-2 PtP   MPI, PtP Digital
CPU 313C-2 DP 1)   MPI, DP Digital
CPU 314C-2 PtP 1)   MPI, PtP Digital, Analog

As above, and additionally
■ Positioning
CPU 314C-2 DP 1)   MPI, DP Digital, Analog
Technology CPUs
  CPU 315T-2 DP   DP/MPI, DP(DRIVE) Digital ■ Synchronous operation
■ Traversing to fixed stop
■ Pressure mark correction
■ Cam control
■ Controlled positioning
CPU 317T-2DP   DP/MPI, DP(DRIVE) Digital

Technical specifications Compact CPUs

SIMATIC S7-300

CPU CPU 312C 1) CPU 313C 1) CPU 313-2 PtP CPU 313C-2 DP 1) CPU 314C-2 PtP CPU 314C-2 DP 1)
Dimension (mm) 80 x 125 x 130 120 x 125 x 130 120 x 125 x 130
Required front connector 1 x 40-pin 2 x 40-pin 1 x 40-pin 2 x 40-pin
Order No. group: 6ES7 312-5BE. 313-5BF. 313-6BF. 313-6CF. 314-6BG. 314-6CG.
Memory
RAM 32 KB 64 KB 96 KB
Instructions 10 K 21 K 32 K
Processing times
Bit operation 0,2 µs 0,1 µs 0,1 µs
Word operation/fixed-point./floating-point operat. 0,4/5/6 µs 0,2/2/3 µs 0,2/2/3 µs
Bit memories/timers/counters
Bit memory 128 bytes 256 bytes 256 bytes
S7 timers/counters 128/128 256/256 256/256
IEC timers/counters ■ ■ ■
Address areas
I/O (bytes) 1024/1024 1024/1024 1024/1024 1024/1024
Process I/O image 128/128 bytes 128/128 bytes 128/128 bytes 128/128 bytes
Digital channels (central) 266 1016 1008 1016
Analog channels (central) 64 253 248 253
Integrated functions
Counter (incremental enc.) 2 , 24 V/10 kHz 3 incr.enc., 24 V/30 lHz 4 incr.enc., 24 V/60 kHz
Pulse outputs (PCM) 2 channels, max. 2.5 kHz 3 channels, max. 2.5 kHz

4 channels, max. 2.5 kHz
Frequency measurement 2 channels, max. 10 kHz 2 channels, max. 30 kHz 2 channels, max. 60 kHz
Open-loop positioning     SPB for positioning 1 axis via 2 DO, AO
Integrated "Controlling" FB PID controller PID controller PID controller
Integrated I/O
Digital inputs 10 x 24V DC; all channels can be used for process interrupts 24 x 24V DC; all channels can be used for process interrupts 16 x 24V DC; all channels can be used for process interrupts 24 x 24V DC; all channels can be used for process interrupts
Digital outputs 6 x 24 V DC, 0.5 A 16 x 24 V DC, 0.5 A 16 x 24 V DC, 0.5 A 16 x 24 V DC, 0.5 A
Analog inputs   4: ± 10 V, 0..10 V, ± 20 mA, 0/4..20 mA; 1: 0..600 Ω, PT100     4: ± 10 V, 0..10 V, ± 20 mA, 0/4..20 mA; 1: 0..600 Ω, PT100
Analog output   2: ± 10 V, 0..10 V, ± 20 mA, 0/4..20 mA     2: ± 10 V, 0..10 V, ± 20 mA, 0/4..20 mA
DP interface
DP maser systems int./ CP 342-5 -/n -/n -/n ■/n -/n ■/n
DP slave       ■   ■
PtP interface
Properties     RS485/422   RS485/422  
Protocol driver     3964 (R), RK512, ASCII   3964 (R), RK512, ASCII  

Technical specifications Standard CPUs

SIMATIC S7-300

CPU CPU 312 CPU 314 1)

CPU 315-2 DP 1)

 CPU 315-2 PN/DP 1) CPU 317-2 DP CPU 317-2 PN/DP 1) CPU 319-3 PN/DP
Dimension (mm) 40 x 125 x 130 40 x 125 x 130 80 x 125 x 130 80 x 125 x 130 120 x 125 x 130
Order No. group: 6ES7 312-1AE. 314-1AG. 315-2AG. 315-2EH. 317-2AJ. 317-2EK. 318-EL.
Memory
RAM 32 KB 96 KB 128 KB 256 KB 512 KB 1 MB 1.4 MB
Instructions 10 K 32 K 42 K 84 K 170 K 340 K 470 K
Processing times
Bit operation 0.2 µs 0.1 µs 0.1 µs 0.05 µs 0.01 µs
Word operation 0.4 µs 0.2 µs 0.2µs 0.2µs 0.02 µs
Fixed-point operation 5 µs 2 µs 2 µs 0.2 µs 0.02 µs
Floating-point operation 6 µs 3 µs 3 µs 1 µs 0.04 µs
Bit memories/times/counters
Bit memory 128 bytes 256 bytes 2048 bytes 4096 bytes 8192/8192
S7 timers/counters 128/128 256/256 256/256 512/512 2048/2048
IEC timers/ counters

■

■

■

■

■
Address areas
I/O (bytes) 1024/1024 1024/1024 2048/2048 8192/8192 8192/8192 8192/8192
I/O process image (bytes) 128/128 128/128 128/128 256/256 2048/2048 2048/2048
Digital channels (central) 256 1024 1024 1024 1024 1024
Analog channels (central) 64 256 256 256   256
DP interfaces
DP master system internal / CP 342-5 -/■ ■/■ ■/■ ■/■ ■/■
DP slaves   ■ ■ ■
PROFINET interface
PROFINET CBA     ■ ■ ■
PROFINET IO     ■ ■ ■
TCP/IP     ■ ■ ■
UDP     ■ ■ ■
ISO-on-TCP (RFC 1006)     n ■ ■
Web server     n ■ ■

More Articles...

More Articles ...

  1. Siemens S7-300 PLC
  2. Technical specifications Compact CPUs
  3. Technical specifications Standard CPUs
  4. Construction components
Page 11 of 156
  • Installation And Commissioning
  • Designing Services
  • On-Site Troubleshooting
  • Retrofit Controls
  • Assessment Services
  • Repair & Maintenance

new installation

Installation And Commissioning Services

Flawless installation quality, execution, cost management, safety and smooth start-up – make C&M an ideal partner today and throughout the entire lifecycle of your control system equipment. C&M's installation and commissioning services are available to meet critical business needs anywhere in Pakistan, regardless of size or complexity. Support is available for new applications as well as re-commissioning services or ‘return to service’ equipment. Services include functional test and on-site configuration of control system components through full process control commissioning. Long term support for all automation related products including Programmable Logic Controllers PLC's and VFD's is provided to help you run your operations smoothly

Services include:

• Machinery/Plant/Equipment placement checks

• Complete control panel wiring, Riser diagram, Cable tray laying and field wiring

• Wiring dry tests, wiring hot tests, power up checks, motor rotational checks, sensor and actuator signal checks

• Functional verification of system hardware and software at site

• Client training

• Control tuning and sensor correlation

• Performance verification and documentation

Services Benefits

• Smoother installations

• Faster start up at lower cost

• Complete knowledge transfer from Manufacturer to client ensuring smooth operation across plant life-cycle

• Optimized system performance

Why choose us!

Our vision

To be pioneer of our time in the field of automation engineering,that will enable us to create value for everyone involved by delivering world-class factory automation services.

Our Mission

We increase efficiency of your process,business and our society by automation through reduction of resource utilization,waste and environmental impact.

Reliability

We strive to perform root cause analysis for all frequent breakdowns so that such problems can be prevented in future.

Expertise

With a very diverse experience of all major industrial segments, our expertise and System Integration is unmatched.

Designing

Designing Services

C&M is a leading Systems Integrator providing integrated strategies, solutions, systems and services that address the needs of today’s industrial processes and companies’ goals. C&M helps clients by developing, implementing, and supporting custom process automation and information integration solutions. 

To meet client needs for complete solutions and results, C&M utilizes a variety of advanced engineering concepts. This process begins with understanding our clients’ goals and needs and developing solutions that meet and exceed their expectations.

C&M has its own, in-house development team, with capabilities to design and prototype from PCB level to Process control system design.

Our strengths include:

  • Micro-controller  based embedded system design
  • Programmable Logic Controller (PLC) based Control System Design, and PLC programming services for Siemens, Mitsubishi, Allen Bradley, Omron, Fuji, and Opto22 are offered
  • Computer-based machine control and interface development on Siemens WinCC and LabView
  • Computer based data-logging, monitoring, automatic testing systems with report generation
  • Control Panel Design and wiring

panel

 

On Site Troubleshooting

On-Site Troubleshooting

With our on-site services, you can obtain C&M field support engineers to assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.

Field support engineers are available on as needed, scheduled, or full-time basis to meet your specific needs and maintenance strategy.

  • Callout Services — Repair and troubleshooting as needed for your automation-related issues.
  • Drives Startup Services — Quickly commission your Allen-Bradley drives and prevent potential startup problems. Includes 1 or 2 year extended warranty.
  • Conversion Services — Convert your existing programmable controllers, drives and motors to new or different technologies.
  • Preventive Maintenance Services — Regularly scheduled maintenance for your automation and related equipment to prevent potential problems and extend component/system life.
  • Embedded Engineer — Full-time labor to perform reactive and preventive tasks in continuous support of your maintenance department.

Callout Services

Day or night, C&M field service professionals are available for dispatch on an as needed basis to help troubleshoot and resolve unplanned downtime events, problems affecting critical operations and other automation-related issues. Callout Services are billed on a time and material basis.

Benefits And Features

  • 24x7x365 emergency breakdown support
  • Assistance for startup, special projects, and peak workloads
  • Production problem resolution
  • Technical support during maintenance activity
  • Factory-certified engineers with skills matched to your application or problem

Drives Startup Services

Integration and start-up of your system does not need to be complex and time consuming. With our Start-up Services, you can leverage our extensive product and industry experience to quickly commission drives and reduce the time between integration and actual machine operation.

Benefits And Features

  • Reduce time between integration and actual start-up
  • Provide a cost-effective alternative to internal start-up resources
  • Improve drive operation
  • Reduce risk of performance problems and premature equipment failures
  • Improve labor cost forecasting (thru fixed cost of services)
  • Verification of proper drive and motor installation, control and power wiring, and AC voltage and distribution network
  • Power-up, drive checks, grounding checks and setup
  • Custom drive configuration/tuning to meet specific application requirements
  • Adjustment of operating parameters for optimal performance
  • Documentation of drive and motor nameplate information, application information, drive settings and operating parameters

Conversion Services

As your automation equipment becomes older and less reliable, you can repair it, replace it with identical equipment, or migrate it to a new/different technology.

With conversion services from C&M, you can leverage our automation expertise if you choose to migrate. For a fixed price you will receive a complete upgrade solution including hardware, software conversion engineering and start-up services. Benefits of OnSite Conversion Services include:

  • Improved process availability and production capacity
  • Improved manufacturing quality
  • Decreased long term costs and unplanned downtime

OnSite Conversion Services are available for:

  • Upgrading your Operator Interface with current technology (one-to-one)
  • Replacing an AC or DC drive with current technology (one-to-one)
  • Replacing a PLC controller with current technology (one-to-one)
  • Updating automation software and communication/HMI technology
  • Converting an analog PLC controller, drive, or HMI product to its digital counterpart
  • Implementing or converting a network for your automation assets

Maintenance Services

Lost productivity caused by poor performance or unplanned failure of your automation assets can significantly reduce your revenue and profitability. With a Preventive Maintenance Service Agreement, we help you design and implement the most efficient preventive maintenance program for optimizing the performance of your assets including drives, programmable logic controllers and motion systems.

What Makes Our Preventive Maintenance Services Agreement Different?

Total protection and peace of mind with the full support of C&M to stand behind your preventive maintenance program:

  • 24/7 remote troubleshooting available to get your plant online as fast as possible
  • Remediation of equipment problems
  • Complete documentation of all activities performed during scheduled visits
  • Full-service warranty that ensures we'll repair or replace the parts in the unlikely event of a failure

Embedded Engineer

A C&M embedded engineer provides full-time, on-site labor to perform reactive and preventive tasks in continuous support of your maintenance department. Services can include preventive maintenance, support/troubleshooting, startup, conversions/upgrades, condition monitoring, project management, OJT, performance analysis, application development and more.

Benefits

  • Obtain skilled resources to quickly and efficiently complete engineering and programming projects
  • Reduce response time to equipment malfunctions and unplanned downtime
  • Perform preventive maintenance as scheduled
  • Improve machine operator skills and internal troubleshooting capabilities
  • Supplement operations/maintenance staff during peak workloads
  • Obtain spare parts and additional services through one resource
  • Fully protect your biggest investment — your operations

Retrofit Controls

Retrofit Controls

It is always better in the long run to upgrade your controls. Obsolete parts are a hassle to maintain and expensive to procure. In time upgradation not only saves you from unexpected downtimes, but also provides opportunity to improve upon machine knowledge. C&M can design a new control system to interface with your existing electrical devices or, for those with older systems that have obsolete or worn devices. We can design and build a new enclosure with all new devices.

Retrofit controls options:

  • Touch Screen Operator Interface.
  • PC Based Operator Interface
  • HMI (Human Machine Interface) Monitor and control of all types of on-line off-line devices including Temperature, Solenoids, Rectifiers, Pumps, Filters etc.

We have successfully retrofited a number of CNC machines with new PC based controls including Lathe, Milling, Turret Punch, EDM Wire-cut.

Following Retrofit and Migration services have been provided by us to various clients

  • Siemens SIMATIC S5 to S7
  • Allen Bradley PLC-5 to SLC-500/CompactLogix
  • GE-FANUC 90-30 to RX3i
  • Manufacturers custom controls to Standard PLC/PAC based system

Our engineers are also capable of retrofitting Generator Controls.

 

Assessment Services new

Assessment Services

Safety Assessments

Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls. Our solutions can help reduce lost-time accidents, improve workplace safety and improve employee morale, which will ultimately result in increased productivity.

These exception-based assessments are a quick and inexpensive way to audit a machine /work cell to determine the obvious points of operation and power transmission hazards. The result of the hazard assessment is a concise report that identifies the location of each observed hazard and provides a rough budgetary estimate for safeguarding. The hazard assessment will also provide:

  • General recommendations on how to guard a machine/work cell
  • A prioritization plan for your machine safeguarding project when many unique machines need to be evaluated and upgraded
  • The unbiased, third party opinion of a machine safety consultant with the required knowledge of relevant safety standards, best practices and current safeguarding technology.

 

Repair & Maintenance

Browse by Manufacturer

 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


repair service

C&M is providing Engineering services to all type of industries from a decade. We offer repair & services of all type of motor controllers including VFD, Servo and Stepper drives. We are also specialize in providing services for Machine cards, PLC`s,  HMI`s, Electrical Panels, AC/DC Drives, Controllers, Power Transmission, Servo drive, Electric Actuators, PCB Board, AC/DC, DC/DC Drives, Monitor, Equipment & Compressors.

C&M Engineering offers a cost effective and reliable service for all your machinery cards, drives repairs from many of the leading manufacturers. All of our technicians have been trained and are supported by continuous improvement programs, refresher courses and regular service bulletins. We also offer evaluation of your repair, depending on the complexity of the equipment.

Why choose C&M, Pakistan?

Because we have the knowledge and expertise to fix and rebuild your device professionally same as original. Our facility is fully equipped with most modern equipment's to meet the demanding challenges required to fix your equipment.

C&M is pleased to offer you our best services.

Why choose us!

Because we have the knowledge and expertise to fix and rebuild your device professionally same as original. Our facility is fully equipped with most modern equipment's to meet the demanding challenges required to fix your equipment.

C&M is pleased to offer you our best services.