| Panel Mount Power Supply | |
 |
|
 Datasheet (PDF) |
|
| Introduction | |
|
Panel Mount Power Supply |
|
-
Address
C-188, Sector 31-D, P&T Society,
Korangi Industrial Area,
Karachi-74900,
Pakistan
-
Call us on
+92-21-35070751
+92-300-5776703
-
- You are here:
-
Home
-
Services
-
Retrofit Controls
- Uncategorised
RS-485 I/O Modules: ADAM-4000
ADAM-4000 modules are the perfect choice for establishing a cost-effective remote I/O system. Customers can benefit from ADAM-4000 modules through its simple wiring --- using only two wires to communicate with their controller or other RS-485 devices. ADAM-4000 modules use the EIA RS-485 communication protocol; the industry's most widely used bi-directional, balanced transmission line suitable for industrial environments.
|
Product Catagories
| |
|---|---|
 |
ADAM-4100 series I/O modules are compact and versatile sensor-to-computer interface units. They are designed for reliable operation in harsh environments, and can operate normally in wide temperatures from -40 to 85° C, with wide power input and resistance against noise-interference. |
 |
ADAM-4000 controllers include the ADAM-4500, ADAM-4501, and ADAM-4502. The ADAM-4501 is compact Ethernet-enabled controllers with an x86 CPU architecture, which supports not only an Ethernet interface but also serial ports. The Ethernet-enabled features include built-in HTTP Server, FTP Server and email alarm functions. The modularized I/O design provides high flexibility for versatile application requirements. |
 |
Analog input modules supply many kinds of the sources, such like thermocouple, RTD, Thermistor or general analog signals. These modules use the EIA RS-485 communication protocol, the industry's most widely used bi-directional, balanced transmission line standard. They also support the Modbus/RTU protocol as the remote data transmission mechanism. Analog output modules can provide 1 channel to 4 channels to satisfy many kinds of application. |
 |
Advantech's digital input/output modules are equipped with isolation and failure protection to provide reliable operation. |
Robust Remote I/O Modules
ADAM-4100 series I/O modules are compact and versatile sensor-to-computer interface units. They are designed for reliable operation in harsh environments, and can operate normally in wide temperatures from -40 to 85° C, with wide power input and resistance against noise-interference.
| Product | ||
| Model Number | Description | |
| ADAM-4117 | Robust 8-ch Analog Input Module with Modbus | |
| ADAM-4118 | Robust 8-ch Thermocouple Input Module with Modbus | |
| ADAM-4150 | Robust 15-ch Digital I/O Module with Modbus | |
| ADAM-4168 | Robust 8-ch Relay Output Module with Modbus | |
Wireless I/O Modules: ADAM-2000
Integrated with wireless functionality, power management, and I/O technologies, the ADAM-2000 series are revolutionary products for data acquisition. Based on the IEEE 802.15.4 wireless standard, networks can be easily deployed and extended. Moreover, low rates and low duty cycles make it possible for them to act as standalone devices, providing cost-effective distributed I/O solutions. With the popular industrial communication protocol Modbus RTU, ADAM-2000 series products can be adapted into any SCADA or industrial system with Advantech products, such as IPCs, ADAM, EKI, or WebAccess.
| Product | ||
| Model Number | Description | |
| ADAM-2031Z | Wireless Temperature & Humidity Sensor Node | |
| ADAM-2051Z | Wireless 8-ch Digital Input Node | |
| ADAM-2051PZ | Wireless 8-ch Digital Input Node with Power Amplifier | |
| ADAM-2510Z | Wireless Router Node | |
| ADAM-2510Z | Wireless Modbus RTU Gateway | |
| DMU-3010 | 8-ch AI, 8-ch DI, 4-ch DO Ethernet I/O Module | |
| WSN-4011 | 3-ch Analog Input Node | |
| WSN-4051 | 4-ch Digital Input Node | |
| WSN-4061 | 3-ch Relay Output Node | |
| WSN-4510 | WSN Router Node | |
| WSN-4520 | WSN Modbus RTU Gateway | |
Controller Modules
ADAM-4000 controllers include the ADAM-4500, ADAM-4501, and ADAM-4502. The ADAM-4501 is compact Ethernet-enabled controllers with an x86 CPU architecture, which supports not only an Ethernet interface but also serial ports. The Ethernet-enabled features include built-in HTTP Server, FTP Server and email alarm functions. The modularized I/O design provides high flexibility for versatile application requirements.
| Product | ||
| Model Number | Description | |
| ADAM-4500 | PC-based Communication Controller | |
| ADAM-4501 | Ethernet-enabled Communication Controller with 8-ch DI/O | |
| ADAM-4502 | Ethernet-enabled Communication Controller with 2-ch AI/O and 4-ch DI/O | |
More Articles ...
- Installation And Commissioning
- Designing Services
- On-Site Troubleshooting
- Retrofit Controls
- Assessment Services
- Repair & Maintenance
Installation And Commissioning Services
Flawless installation quality, execution, cost management, safety and smooth start-up – make C&M an ideal partner today and throughout the entire lifecycle of your control system equipment. C&M's installation and commissioning services are available to meet critical business needs anywhere in Pakistan, regardless of size or complexity. Support is available for new applications as well as re-commissioning services or ‘return to service’ equipment. Services include functional test and on-site configuration of control system components through full process control commissioning. Long term support for all automation related products including Programmable Logic Controllers PLC's and VFD's is provided to help you run your operations smoothly
Services include:
• Machinery/Plant/Equipment placement checks
• Complete control panel wiring, Riser diagram, Cable tray laying and field wiring
• Wiring dry tests, wiring hot tests, power up checks, motor rotational checks, sensor and actuator signal checks
• Functional verification of system hardware and software at site
• Client training
• Control tuning and sensor correlation
• Performance verification and documentation
Services Benefits
• Smoother installations
• Faster start up at lower cost
• Complete knowledge transfer from Manufacturer to client ensuring smooth operation across plant life-cycle
• Optimized system performance
Why choose us!
Our vision
To be pioneer of our time in the field of automation engineering,that will enable us to create value for everyone involved by delivering world-class factory automation services.
Our Mission
We increase efficiency of your process,business and our society by automation through reduction of resource utilization,waste and environmental impact.
Reliability
We strive to perform root cause analysis for all frequent breakdowns so that such problems can be prevented in future.
Expertise
With a very diverse experience of all major industrial segments, our expertise and System Integration is unmatched.
Designing Services
C&M is a leading Systems Integrator providing integrated strategies, solutions, systems and services that address the needs of today’s industrial processes and companies’ goals. C&M helps clients by developing, implementing, and supporting custom process automation and information integration solutions.
To meet client needs for complete solutions and results, C&M utilizes a variety of advanced engineering concepts. This process begins with understanding our clients’ goals and needs and developing solutions that meet and exceed their expectations.
C&M has its own, in-house development team, with capabilities to design and prototype from PCB level to Process control system design.
Our strengths include:
- Micro-controller based embedded system design
- Programmable Logic Controller (PLC) based Control System Design, and PLC programming services for Siemens, Mitsubishi, Allen Bradley, Omron, Fuji, and Opto22 are offered
- Computer-based machine control and interface development on Siemens WinCC and LabView
- Computer based data-logging, monitoring, automatic testing systems with report generation
- Control Panel Design and wiring
On-Site Troubleshooting
With our on-site services, you can obtain C&M field support engineers to assist your maintenance staff with troubleshooting, preventive and reactive maintenance tasks.
Field support engineers are available on as needed, scheduled, or full-time basis to meet your specific needs and maintenance strategy.
- Callout Services — Repair and troubleshooting as needed for your automation-related issues.
- Drives Startup Services — Quickly commission your Allen-Bradley drives and prevent potential startup problems. Includes 1 or 2 year extended warranty.
- Conversion Services — Convert your existing programmable controllers, drives and motors to new or different technologies.
- Preventive Maintenance Services — Regularly scheduled maintenance for your automation and related equipment to prevent potential problems and extend component/system life.
- Embedded Engineer — Full-time labor to perform reactive and preventive tasks in continuous support of your maintenance department.
Callout Services
Day or night, C&M field service professionals are available for dispatch on an as needed basis to help troubleshoot and resolve unplanned downtime events, problems affecting critical operations and other automation-related issues. Callout Services are billed on a time and material basis.
Benefits And Features
- 24x7x365 emergency breakdown support
- Assistance for startup, special projects, and peak workloads
- Production problem resolution
- Technical support during maintenance activity
- Factory-certified engineers with skills matched to your application or problem
Drives Startup Services
Integration and start-up of your system does not need to be complex and time consuming. With our Start-up Services, you can leverage our extensive product and industry experience to quickly commission drives and reduce the time between integration and actual machine operation.
Benefits And Features
- Reduce time between integration and actual start-up
- Provide a cost-effective alternative to internal start-up resources
- Improve drive operation
- Reduce risk of performance problems and premature equipment failures
- Improve labor cost forecasting (thru fixed cost of services)
- Verification of proper drive and motor installation, control and power wiring, and AC voltage and distribution network
- Power-up, drive checks, grounding checks and setup
- Custom drive configuration/tuning to meet specific application requirements
- Adjustment of operating parameters for optimal performance
- Documentation of drive and motor nameplate information, application information, drive settings and operating parameters
Conversion Services
As your automation equipment becomes older and less reliable, you can repair it, replace it with identical equipment, or migrate it to a new/different technology.
With conversion services from C&M, you can leverage our automation expertise if you choose to migrate. For a fixed price you will receive a complete upgrade solution including hardware, software conversion engineering and start-up services. Benefits of OnSite Conversion Services include:
- Improved process availability and production capacity
- Improved manufacturing quality
- Decreased long term costs and unplanned downtime
OnSite Conversion Services are available for:
- Upgrading your Operator Interface with current technology (one-to-one)
- Replacing an AC or DC drive with current technology (one-to-one)
- Replacing a PLC controller with current technology (one-to-one)
- Updating automation software and communication/HMI technology
- Converting an analog PLC controller, drive, or HMI product to its digital counterpart
- Implementing or converting a network for your automation assets
Maintenance Services
Lost productivity caused by poor performance or unplanned failure of your automation assets can significantly reduce your revenue and profitability. With a Preventive Maintenance Service Agreement, we help you design and implement the most efficient preventive maintenance program for optimizing the performance of your assets including drives, programmable logic controllers and motion systems.
What Makes Our Preventive Maintenance Services Agreement Different?
Total protection and peace of mind with the full support of C&M to stand behind your preventive maintenance program:
- 24/7 remote troubleshooting available to get your plant online as fast as possible
- Remediation of equipment problems
- Complete documentation of all activities performed during scheduled visits
- Full-service warranty that ensures we'll repair or replace the parts in the unlikely event of a failure
Embedded Engineer
A C&M embedded engineer provides full-time, on-site labor to perform reactive and preventive tasks in continuous support of your maintenance department. Services can include preventive maintenance, support/troubleshooting, startup, conversions/upgrades, condition monitoring, project management, OJT, performance analysis, application development and more.
Benefits
- Obtain skilled resources to quickly and efficiently complete engineering and programming projects
- Reduce response time to equipment malfunctions and unplanned downtime
- Perform preventive maintenance as scheduled
- Improve machine operator skills and internal troubleshooting capabilities
- Supplement operations/maintenance staff during peak workloads
- Obtain spare parts and additional services through one resource
- Fully protect your biggest investment — your operations
Retrofit Controls
It is always better in the long run to upgrade your controls. Obsolete parts are a hassle to maintain and expensive to procure. In time upgradation not only saves you from unexpected downtimes, but also provides opportunity to improve upon machine knowledge. C&M can design a new control system to interface with your existing electrical devices or, for those with older systems that have obsolete or worn devices. We can design and build a new enclosure with all new devices.
Retrofit controls options:
- Touch Screen Operator Interface.
- PC Based Operator Interface
- HMI (Human Machine Interface) Monitor and control of all types of on-line off-line devices including Temperature, Solenoids, Rectifiers, Pumps, Filters etc.
We have successfully retrofited a number of CNC machines with new PC based controls including Lathe, Milling, Turret Punch, EDM Wire-cut.
Following Retrofit and Migration services have been provided by us to various clients
- Siemens SIMATIC S5 to S7
- Allen Bradley PLC-5 to SLC-500/CompactLogix
- GE-FANUC 90-30 to RX3i
- Manufacturers custom controls to Standard PLC/PAC based system
Our engineers are also capable of retrofitting Generator Controls.
Assessment Services
Safety Assessments
Safety Assessments help you comply with current and emerging standards by providing consulting services for safety critical controls. Our solutions can help reduce lost-time accidents, improve workplace safety and improve employee morale, which will ultimately result in increased productivity.
These exception-based assessments are a quick and inexpensive way to audit a machine /work cell to determine the obvious points of operation and power transmission hazards. The result of the hazard assessment is a concise report that identifies the location of each observed hazard and provides a rough budgetary estimate for safeguarding. The hazard assessment will also provide:
- General recommendations on how to guard a machine/work cell
- A prioritization plan for your machine safeguarding project when many unique machines need to be evaluated and upgraded
- The unbiased, third party opinion of a machine safety consultant with the required knowledge of relevant safety standards, best practices and current safeguarding technology.
Repair & Maintenance
Browse by Manufacturer
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
C&M is providing Engineering services to all type of industries from a decade. We offer repair & services of all type of motor controllers including VFD, Servo and Stepper drives. We are also specialize in providing services for Machine cards, PLC`s, HMI`s, Electrical Panels, AC/DC Drives, Controllers, Power Transmission, Servo drive, Electric Actuators, PCB Board, AC/DC, DC/DC Drives, Monitor, Equipment & Compressors.
| We provide service for all manufactures that includes. | |
|
|
|
|
|
|
C&M Engineering offers a cost effective and reliable service for all your machinery cards, drives repairs from many of the leading manufacturers. All of our technicians have been trained and are supported by continuous improvement programs, refresher courses and regular service bulletins. We also offer evaluation of your repair, depending on the complexity of the equipment.
Why choose C&M, Pakistan?
Because we have the knowledge and expertise to fix and rebuild your device professionally same as original. Our facility is fully equipped with most modern equipment's to meet the demanding challenges required to fix your equipment.
C&M is pleased to offer you our best services.
Why choose us!
Because we have the knowledge and expertise to fix and rebuild your device professionally same as original. Our facility is fully equipped with most modern equipment's to meet the demanding challenges required to fix your equipment.
C&M is pleased to offer you our best services.